Difference between normalvalue and thresholdvalue under SNMP configuration
Article ID: CTX584232
Updated On:
Description
This article explains the difference between thresholdValue and normalValue under SNMP configuration.
Instructions
ThresholdValue: Value for the high threshold. The NetScaler appliance generates an SNMP trap message when the value of the attribute associated with the alarm is greater than or equal to the specified high threshold value.
NormalValue: Value for the normal threshold. A trap message is generated if the value of the respective attribute falls to or below this value after exceeding the high threshold.
Was this article helpful?
Yes
No
Powered by
