ADC Upgrade Stalls When Run From GUI
Article ID: CTX236770
Updated On:
Description
When running ADC software upgrade from the GUI it stalls.
Upgrade works well when using CLI.
Resolution
Please upgrade to ADC to 11.1 59, 12.0 58 or 12.1 47 or later using CLI.
After the ADC is in any of that versions or later upgrades using GUI should work fine.
Refer to Citrix Documentation for detailed information :https://docs.citrix.com/en-us/citrix-adc/12-1/upgrade-downgrade-citrix-adc-appliance/troubleshooting.html
After the ADC is in any of that versions or later upgrades using GUI should work fine.
Refer to Citrix Documentation for detailed information :https://docs.citrix.com/en-us/citrix-adc/12-1/upgrade-downgrade-citrix-adc-appliance/troubleshooting.html
Problem Cause
Issue 708899 - VPX image upgrade thru GUI stuck and not workingAdditional Information
Check in /var/log/notice.log for HUP messages in installns
May 29 15:44:05 <user.notice> ns1 installns: [31562]: ABORTED_OTHER: HUP
May 29 15:44:05 <user.notice> ns1 installns: [31562]: ABORTED INSTALLATION DUE TO SIGNAL HUP
May 29 15:44:05 <user.notice> ns1 installns: [31562]: ABORTED_OTHER: HUP
May 29 15:44:05 <user.notice> ns1 installns: [31562]: ABORTED INSTALLATION DUE TO SIGNAL HUP
Was this article helpful?
Yes
No
Powered by
