The virtual appliance (VPX) environment was initially operating with a memory allocation of 16 GB, which was insufficient to maintain the recommended CPU-to-memory ratio for the provisioned workloads. This resource imbalance can lead to processing bottlenecks and degraded performance in high-throughput environments. Furthermore, the CPU management parameters required adjustment to ensure the virtual appliance properly interacted with the underlying hypervisor, preventing the VPX from unnecessarily monopolizing host CPU cycles during idle period
These modifications were implemented in accordance with standard vendor best practices for VPX resource allocation and virtual infrastructure management. While these specific changes have resolved the current issue, continuous monitoring of CPU, memory, and throughput metrics is recommended to establish a new performance baseline. Future significant increases in traffic load, firmware upgrades, or modifications to the underlying hypervisor host may require additional resource tuning.
563 root 103 0 2563M 2406M CPU1 1 9:33 100.00% NSPPE-00
564 root 103 0 2563M 2405M CPU2 2 9:33 100.00% NSPPE-01
567 root 103 0 2563M 2405M CPU5 5 9:33 100.00% NSPPE-04
566 root 103 0 2563M 2405M CPU4 4 9:33 100.00% NSPPE-03
568 root 103 0 2563M 2405M CPU6 6 9:33 100.00% NSPPE-05
569 root 103 0 2563M 2405M CPU7 7 9:33 100.00% NSPPE-06
565 root 103 0 2563M 2405M CPU3 3 9:33 100.00% NSPPE-02
Resource Imbalance: The VPX was operating with an insufficient memory allocation (16 GB) relative to its assigned vCPUs. Packet processing engines require a strict CPU-to-memory ratio to maintain adequate buffer space for connection tracking, SSL offloading, and payload inspection. This mismatch caused memory starvation and processing bottlenecks under load.
CPU Scheduling Contention: The appliance was running without CPU yielding enabled. Because of the way packet processing engines operate, the VPX was constantly polling the virtual CPUs and consuming 100% of its allocated host CPU cycles, even during idle periods with no traffic. This lack of yielding created severe CPU scheduling contention at the hypervisor level, negatively impacting the host and the responsiveness of the virtual appliance itself.
To permanently resolve the issue, the following administrative actions were executed and verified:
Memory Upgrade: Increased the VPX memory allocation from 16 GB to 32 GB on the virtual machines to achieve and maintain an optimal CPU-to-memory ratio.
CPU Yield Configuration: Executed the command set ns vpxparam -cpuyield YES on both HA nodes. This enables the appliance to release idle CPU cycles back to the hypervisor, optimizing host resource utilization.
Configuration Persistence: Saved the running configuration on both HA nodes to ensure the changes persist across reboots or failover events.
Resource allocation and performance optimization changes were implemented on the High Availability (HA) cluster to address system stability. The configuration adjustments successfully resolved the underlying issue by optimizing the CPU-to-memory ratio and improving CPU utilization efficiency across the virtualized nodes.
Feedback submitted!