How to Collect Diagnostic Data by using the Command Line Interface on a WANOP
book
Article ID: CTX231334
calendar_today
Updated On:
Description
This article explains an alternative method for collecting Diagnostic Data by using the command line interface when the Graphical User Interface (GUI) is not accessible on a NetScaler SD-WAN WANOP appliance or WANOP VPX instance.
Instructions
Prerequisite:
IP connectivity to the WANOP appliance or VPX instance
A Secure Shell (SSH) utility such as PuTTY
SFTP client such as WinSCP for file retrieval
Procedure:
To collect diagnostic data using the Command Line Interface, complete the following steps:
Note: It is recommended that this process is completed during non-peak production hours.
1. Connect to the command line interface of a WANOP appliance or VPX using management IP address.
2. Log on using the management credentials if not modified (default: admin/password or nsroot/nsroot).
3. Run the following command to start the data collection: show techsupport
4. The support file above can be found in /home/transfer/files/support Note: The completed data is compressed as a TAR file and is available for download in the /files/support directory. 5. Open a SFTP session to the WANOP appliance using a SFTP client such as WinSCP with the "transfer" account credentials (default: transfer/password). 6. Navigate to /files/support directory to transfer the compressed file to a computer.
Upload Technical Support file: Upload the compressed file(s) to https://cis.citrix.com, with the Service Request number as a reference.
Additional Information
The help command lists the options available for the show techsupport command. The default behavior is to collect all available options.
This command executes a script that will gather data and store the resulting information in the form of a compressed file, so that the data can then be provided to Citrix Support. The default behavior is to collect just current core and crash files, but the -collect option can be used to collect from one or more areas of interest, as well as across all releases. traces = Traces (current, or all releases) cores = Cores (current, or all releases) logs* = Application Logs (current release, or all releases) crashes* = Kernel Crash Dumps drives* = Drive Status and S.M.A.R.T. diagnostics *NOTE : Logs, Crashes and Drives options are for the Linux-based appliance only. The -all-release flag is for the Linux-based appliance only, and is used to also gather applicable information from 'all'/any prior releases. The -priority setting is for Linux-based appliances only, and can allocate fewer or more system resources to the collection operation, which can impact every other running process.