Citrix Hypervisor: ACPI Warning: Incorrect checksum in table [BGRT]
Article ID: CTX460227
Updated On:
Description
hostxxxx kernel: [ 9.091668] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x2B, should be 0x9C (20180810/tbprint-177)
Resolution
- Try updating the UEFI Firmware
- If the issue persists after UEFI firmware has been updates, contact Hardware vendor to check UEFI Firmware.
Problem Cause
BGRT contains the firmware image shown during boot. It has a checksum field and that checksum doesn't match the checksum computed by the kernel.
Was this article helpful?
Yes
No
Powered by
