How to remove and restore a Citrix ADC HA pair without causing IP conflict?
Article ID: CTX270328
Updated On:
Description
How to remove and restore HA pair without causing IP conflict
Instructions
Remove HA pair :1.Disable HA sync in both nodes
2.Configure Stay Primary for the Primary node
3.Configure Stay Secondary for the Secondary node
4.Clear configuration in secondary node with full level
5.Remove HA pair in Primary
Restore:
1.Connect secondary node to switches and configure configurations about interfaces
2.Add HA pair and make sure HA status is OK
3.Enable HA sync/Prop and HA status
Additional Information
More info with CLI can be found here :
https://docs.netscaler.com/en-us/citrix-adc/current-release/system/high-availability-introduction/remove-replace-node-high-availability-setup.html
https://docs.netscaler.com/en-us/citrix-adc/current-release/system/high-availability-introduction/remove-replace-node-high-availability-setup.html
Was this article helpful?
Yes
No
Powered by
