Certified Firmware Versions for T3200 Deployments

Certified Firmware Versions for T3200 Deployments

book

Article ID: CTX227992

calendar_today

Updated On:

Description

Question

Which are the Certified Firmware versions for T3200 Deployments?

Answer

The Firmware versions below are the ones that Engineering/QA used during testing/certification for each release and are recommended for usage at the field.

ATM 8.x

ATM 7.x 

NOTE:
- Only releases that have updates/changes to any components will be added to this KB. If newer releases or intermediate ones have no Firmware changes are not mentioned here since they are using the same firmware versions as the previous ones mentioned here.
- For T3100 Deployments or IBM Bladecenter based please use the article CTX227990 - Certified Firmware Versions for ATM/T3100 Deployments


Release 8.2.3.0

  • Recommended firmware package: tm-firmware-6.0 Flex
    See the release notes of the tm-firmware-6.0 for the exact versions for each component.

Firmware levels for components that are not included in the tm-firmware packages:

Switch/SMM

PartVersion
EN4093R Switch8.4.4.0
CMM2/SMM1aon14a-1.6.0

Release 8.2.1.0

  • Recommended firmware package: tm-firmware-5.0 Flex
    See the release notes of the tm-firmware-5.0 for the exact versions for each component.

Firmware levels for components that are not included in the tm-firmware packages:

Switch/SMM

PartVersion
EN4093R Switch8.3.10.0
CMM2/SMM1aon08a-1.3.0a

Release 8.2.0.0

  • Same as 8.0.3.0 Release
  • TM-Firmware package: tm-firmware-4.0 Flex

NOTE:
With Release 8.2.0.0 and later support of the "tm-firmware" files is added even on software mode only setups (T-Soft) on real hardware.

Firmware levels for components that are not included in the tm-firmware packages:

Switch/SMM

PartVersion
EN4093R Switch8.2.1.0
CMM2/SMM1aon02c-1.0.2c

Release 8.0.3.0

  • TM-Firmware package: tm-firmware-4.0 Flex

NOTE:
At Release 8.0.3.0 the Blade firmware versions are shown below and are the same as the ones included at the "tm-firmware-4.0 Flex" file.
But the support of the "tm-firmware" files is added at Release 8.2.0.0 and later, so for release 8.0.3.0 the Blades need to be upgraded manually.

CSM/ASM/x240-M5

PartCSM400ASM400/ASM410x240-M5
UEFIc4e108i-1.20Same as CSM400Same as CSM400
IMMtcoo12r-1.95Same as CSM400Same as CSM400
DSAdsala8b-10.2Same as CSM400Same as CSM400
NIC10.6.228.13-2Same as CSM400Same as CSM400
SAS/RAID (CSM Only)sraidmr_1210e-24.9.0-0026-Same as CSM400
SAS/SATA (CSM Only)hdd_sas-1.18.02-Same as CSM400

Switch/SMM

PartVersion
EN4093R Switch8.2.1.0
CMM2/SMM1aon02c-1.0.2c

Release 7.1.3.0

CSM/ASM/x240-M5

PartCSM400ASM400/ASM410x240-M5
UEFIc4e106j-1.10Same as CSM400Same as CSM400
IMMtcoo08v-1.64Same as CSM400Same as CSM400
DSAdsala6l-10.1Same as CSM400Same as CSM400
NIC10.3.144.0Same as CSM400Same as CSM400
SAS/RAID (CSM Only)sraidmr_1210e-24.7.0-0052-Same as CSM400
SAS/SATA (CSM Only)hdd_sas-1.16.05-Same as CSM400

Switch/SMM

PartVersion
EN4093R Switch8.2.1.0
CMM2/SMM1aon02c-1.0.2c