This article describes how to configure authentication at StoreFront using NetScaler Gateway - StoreFront Configuration.

Instructions

Configuring StoreFront 

After exporting the GatewayConfig.zip file from the NetScaler, the next step is to import the file into your StoreFront server to complete the configuration.

1. To begin, open the StoreFront Management Console and navigate to Manage NetScaler Gateways under the Actions section for the store.
   

2. Select the imported from file link
   

3. Browse to the GatewayConfig.zip file and Click Open. On the next screen click Import
   

4. At the callback URL screen click Next as the callback URL is not needed unless SmartAccess is being used.
   

5. At the Secure Ticket Authority screen click Next if the STA status shows fine. If not, you will need to correct the STA configuration before continuing.

6. Use the Edit button to change the STA configuration.
   

7. Verify the settings in the Review Changes screen and if correct click Import
   

8. Once the import completes, select Finish and Close
   
   

9. If you navigate to Manage NetScaler Gateway, you should see the newly imported NetScaler Gateway.
   

Testing the Configuration via Receiver for Web and Citrix Receiver Receiver for Web Test

1. Open a browser and navigate to the NetScaler Gateway URL, and login at the prompt.
   

2. If successfully logged on, you should see your published applications enumerated.
   

Citrix Receiver Test

Performing the same test using Citrix Receiver client, you should be able to log on and get published applications enumerated .

• How to Configure Authentication at StoreFront using NetScaler Gateway – Requirements and Limitations
• How to Configure Authentication at StoreFront using NetScaler Gateway - NetScaler Configuration
• FAQ - Configuring Authentication at StoreFront using NetScaler Gateway