XAPI Keeps Maintenance Mode For A Long Time After Restarting XenServer

XAPI Keeps Maintenance Mode For A Long Time After Restarting XenServer

book

Article ID: CTX218566

calendar_today

Updated On:

Description

XAPI keeps maintenance mode long time after restarting XenServer every time. This issue is happening from XenServer env was configured first.

XAPI can't create network connection to other pool member and xenbr0 raise a network error.

Sep 10 19:36:08 XXXX fe: 5481 (/sbin/ip addr add feXX:0000:0000:0000:c654:44ff:feXX:444a/64 dev xenbr0 scope...) exited with code 2

Sep 10 19:36:08 XXXXX xcp-networkd: [error|XXXXX|47 unix_rpc|Bringing up managed physical PIFs D:4707b0741c4d|network_utils] Call '/sbin/ip addr add feXX:0000:0000:0000:c654:44ff:fe80:444a/64 dev xenbr0 scope link' exited with code 2 [stdout = ''; stderr = 'RTNETLINK answers: Permission denied ']

Resolution

  1. Separate XenServer management interface from storage interface.
  2. If separated management interface can't resolve this issue, then try to use Linux bridge in order to check if OVS is not correct.

Problem Cause

XAPI initialization failed when XenServer tried to create XAPI connection with other pool members.

Issue/Introduction

xapi keep maintenance mode for more than 30 mins.