BSOD Error: "STOP 0x0000007E CVhdMp.sys with Kaspersky antivirus
Article ID: CTX217997
Updated On:
Description
When booting from the Network, to run the Imaging Wizard or simply to boot from a vDisk, the following Blue Screen message is displayed:
*** STOP 0x0000007E
*** CVhdMp.sys
Error: BNIStack failed, network stack could not be initialized
*** CVhdMp.sys
Error: BNIStack failed, network stack could not be initialized
Resolution
Used the documented parameters from the Kaspersky guide to install the Kaspersky Agent in compatibility mode with PVS.
If you want to create an installation package for installation of Light Agent virtual machines where Citrix Provisioning Services technology is used, the Ksvla3.kud file has to be used.
Make the following changes to the Ksvla3.kud file in advance:
If you want to create an installation package for installation of Light Agent virtual machines where Citrix Provisioning Services technology is used, the Ksvla3.kud file has to be used.
Make the following changes to the Ksvla3.kud file in advance:
in the [Setup] section, at the end of the Params=/s /pAKINSTALL=1 /pEULA=1 string, add the parameter /pINSTALLONPVS=1
Problem Cause
The Kaspersky Agent was not installed using the documented parameters for compatibility with the PVS Target Device Software.Additional Information
Was this article helpful?
Yes
No
Powered by
