Moving the devices in HA from one location to another

---

Instructions

Before moving NetScaler please perform backup on both HA nodes.
 
Then, schedule a Maintenance window and perform the below steps:

1. Turn off and move the secondary NetScaler to the new rack.
2. Connect it to the network in the new place and make sure there is a Network connectivity.
3. If there is a network connectivity, see if you can ping from one HA node to another.
4. Perform HA failover, secondary will become primary.
5. Now you can turn off the old primary node (that is now secondary) and move it to the new rack.
6. Connect it to the network in the new place and make sure there is a network connectivity.
7. If there is a network connectivity, please see if you can ping from one HA nodes to another.
 

This article gives instructions on how to move the devices in HA pair from one location to another location.