Failed to convert vdisk with error message "BNIStack failed, network stack could not be initialized"
Article ID: CTX203471
Updated On:
Description
Target device unable to startup with error "BNIStack failed, network stack could not be initialized"
Resolution
Remove hidden network adapter in device manager
Detail steps:
1.Start->run->devmgmt.msc
2.Go to the menu, click on View and then select “Shown hidden devices”.
3.Right click on the hidden network device. It has a translucent icon and select remove
Note:
run following command if hidden device not present
set devmgr_show_nonpresent_devices=1
Detail steps:
1.Start->run->devmgmt.msc
2.Go to the menu, click on View and then select “Shown hidden devices”.
3.Right click on the hidden network device. It has a translucent icon and select remove
Note:
run following command if hidden device not present
set devmgr_show_nonpresent_devices=1
Problem Cause
Target boot from incorrect network adapterIssue/Introduction
Failed to convert vdisk with error message "BNIStack failed, network stack could not be initialized"
Was this article helpful?
Yes
No
Powered by
