Hotfix package name: XAE500R01W2K8X64075.MSP
For: Citrix XenApp 5 for Windows Server 2008 64-bit Edition with Hotfix Rollup Pack XAE500W2K8X64R01
Replaces: XAE500R01W2K8X64010, XAE500R01W2K8X64018, XAE500R01W2K8X64029, XAE500R01W2K8X64043, XAE500R01W2K8X64051, XAE500R01W2K8X64054, XAE500R01W2K8X64064
Date: March, 2013
Language supported: English (US)
Readme version: 1.00

Readme Revision History

Important Notes about This Release

• Note: As a best practice, Citrix recommends that you install this and other hotfixes only if you are affected by the specific issues they resolve. Otherwise, Citrix recommends that you wait for the next hotfix rollup pack for your product release. Hotfix rollup packs consolidate most previously released hotfixes and allow you to update systems in a convenient, single installation.
• Important: Installing this hotfix over an ICA session is not supported but you can install it through a remote desktop session using an administrator account.
• Caution! This release may require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

Important Disclaimer - Limited Release Hotfix

If the Download link is not available on this page and you wish to obtain this limited distribution release, visit our support site at http://www.citrix.com/support and open a support case using your Citrix account credentials, or contact your reseller at http://www.citrix.com/partners/locator.

Testing of this release was targeted only at the affected functionality, and regression and stress testing were minimal. Introduce this release to a test environment for evaluation before deploying it to a production environment.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO THE HOTFIX ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, OR SUPPORT AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER CITRIX, NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, MULTIPLE, PUNITIVE OR OTHER DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF DATA, LOSS OF INCOME, LOSS OF OPPORTUNITY, LOST PROFITS, COSTS OF RECOVERY OR ANY OTHER DAMAGES), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT FOR BREACH OF CONTRACT, NEGLIGENCE OR OTHERWISE, AND WHETHER OR NOT CITRIX, ITS SUPPLIERS, OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Where to Find Documentation

This document describes the issue(s) resolved by this release and includes installation instructions. For additional product information, see Citrix eDocs, the Citrix Product Documentation Library.

New Fixes in This Release

1. Session hosts with Fix #LA0551 applied fail to communicate their session load to the data store accurately. Restarting the IMA Service on affected session hosts resolves the issue. After installing this fix, restarting the IMA Service is no longer necessary for those servers to report their session loads accurately.

   [From XAE500R01W2K8X64075][#LA2227]

Fixes from Replaced Hotfixes

1. Users might experience delays logging on when the domain controller is offline.

   [From XAE500R01W2K8X64010][#195628]

2. Configuring the NetScaler Citrix XML Service monitor probe to point to a server running XenApp 5 for Windows Server 2008 causes the load on that server to increase to 9,990 as evidenced by running the qfarm /load output command. As a result, the server refuses to accept new connections as long as it is being monitored.

   [From XAE500R01W2K8X64010][#256301]

3. Under certain circumstances, disconnected sessions do not reconnect.

   [From XAE500R01W2K8X64018][#175501]

4. An administrator's session might get disconnected when another user logs on to the same server.

   [From XAE500R01W2K8X64018][#204846]

5. Reconnection attempts through the Web Interface fail when using a mix of user names, such as joe.admin@company.com or company.com\joe.admin or company\joeadmin.

   [From XAE500R01W2K8X64018][#253205]

6. This fix addresses the following issue:

   • Users might get directed to servers scheduled for restart and with logons disabled
   • Servers scheduled for restart and with logons disabled are listed when running the qfarm /load command

   [From XAE500R01W2K8X64029][#259617]

7. Attempts to reconnect to a disconnected session can result in a new session when launching a different application after reconnecting.

   To enable this fix, you must set the following registry keys:

   HKEY_LOCAL_MACHINE\Software\Wow6432Node\Citrix\IMA
   Name: ReconnectWithNewApplication
   Type: REG_DWORD
   Data: 1

   HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Citrix
   Name: ReconnectWithNewApplication
   Type: REG_DWORD
   Data: 1

   [From XAE500R01W2K8X64043][#LA0367]

8. The IMA Service fails to start when the value of HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\IMA\RUNTIME\PSRequired (64-bit Windows) is set to 1; for example, when recreating a server's local host cache, and the System Event Log records the following error messages:

   Event Type: Error
   Event Source: IMAService
   Event ID: 3609
   Description:
   Failed to load plugin C:\Program Files (x86)\Citrix\System32\Citrix\IMA\SubSystems\MfSrvSs.dll with error IMA_RESULT_REGISTRY_ERROR

   Event Type: Error
   Event Source: IMAService
   Event ID: 3601
   Description:
   Failed to load initial plugins with error IMA_RESULT_REGISTRY_ERROR

   On systems with Hotfix Rollup Pack 2 or later installed, the following, additional error message is also logged for each product installation that cannot be validated:

   Source: IMAService
   ID: 3997
   Description: Installation of the following product failed verification: <Failing Product Name>. This occurs when the installer files are missing from the Windows Installer cache. Run a repair on the missing product from the Add or Remove Programs Control Panel Applet to correct this problem.

   After applying this hotfix, the IMA Service does start even if the installation of installed products cannot be verified and the System Event Log records the following, improved warning:

   Event Type: Warning
   Event Source: MetaFrameEvents
   Event ID: 1227
   Description:
   The Citrix Independent Management Architecture service was unable to locate the required cached copies of Citrix Windows Installer files. It will ignore this error and continue to start up. However, the list of installed Citrix products may not be displayed correctly in the management consoles and future install, uninstall or upgrade of Citrix software or hotfixes may fail.

   [From XAE500R01W2K8X64051][#209308]

9. The IMA service can experience a delay or can block the logons to the XenApp server. The issue occurs when there is a problem with the UPN call to Active Directory during the logon. The following error message can appear:

   "Cannot connect to the Ctrix Xenapp server. The server you have selected is not accepting connections."

   This fix introduces a registry key to add a timeout to the User Principal Name (UPN) call if the response is delayed or does not return.

   To enable this fix, you must create the following registry key:

   HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432node\Citrix\IMA
   Name: DsBindingTimeout
   Type: REG_DWORD
   Data: <Timeout value, in seconds. If there is no value present, the timeout is set to 1 second.>

   [From XAE500R01W2K8X64054][#LA0551]

10. When two or more default routes are present in the system, the IMA Service might use the first default route in the list regardless of the metric value. This can cause the application launch requests to fail.

    [From XAE500R01W2K8X64064][#LA2109]

Installing and Uninstalling This Release

Notes:

• Before installing this hotfix, make sure to verify the digital certificate chain validation of the MSP package. For more information, see Knowledge Center article CTX129998.
• This hotfix is packaged with Microsoft Windows Installer 3.0 as a .msp file. For more information about deploying .msp files, see Microsoft article 884016 or visit the Microsoft Web site and search on keyword msiexec.
• This installer program complies with Microsoft User Account Control (UAC). If UAC is enabled, you must run the installer program in elevated mode; that is, with administrative privileges enabled. For more information about UAC, see Microsoft TechNet or visit the Microsoft Web site and search on keyword UAC.
• To install this hotfix successfully, servers must not have registry modification restrictions in place.
• Slipstreaming - installations of the XenApp Server base product packaged with one or more individual hotfixes - is not supported and might leave servers in an unstable state.
• This hotfix might or might not prompt you to restart the server when the installation or uninstallation is complete. If you are using the Access Management Console, you must restart the server after installing or uninstalling this hotfix to ensure that the hotfix is added to or removed from the console's hotfix inventory list.
• If the need arises to restore the original settings and functionality provided by this hotfix, you must uninstall the hotfix before reinstalling it according to the installation instructions below.

To install this hotfix:

1. Copy the hotfix package to an empty folder on the hard drive of the server you want to update.
2. Open the Properties tab of the package and verify the digital certificate chain validation.
3. Close all applications.
4. Run the executable.
5. Restart the server. This ensures that the installation completes and that the hotfix is added to the hotfix inventory list of the Access Management Console.

To uninstall this hotfix:

1. From the Start menu, select Control Panel > Programs and Features.
2. Highlight the hotfix you want to uninstall and click Uninstall.
3. Follow the directions on-screen.

Files Updated (All Dates/Times UTC)