NetScaler Max Maximum Segment Size Counter
Article ID: CTX135059
Updated On:
Description
This article contains information about the maximum or minimum value for the ns_max_mss of nsapimgr command.
Max Maximum Segment Size
Run the following command from the shell prompt of a NetScaler appliance to change the Max Maximum Segment Size of the appliance:
nsapimgr -ys ns_max_mss=<value>
The value for ns_max_mss must be between the values 536 and 1460.
If you specify the value less than 536 or more than 1460 with nsapimgr -ys ns_max_mss, the appliance does not recognize the specified value.
Run the following command to confirm the Max Maximum Segment Size value recognized by the appliance:
nsapimgr -d allvariables | grep ns_max_mss
The following screen shot shows that the appliance did not recognize the specified value:
Note: You must access the shell prompt to run the nsapimgr command. The command cannot be issued from the NetScaler command line interface.
Issue/Introduction
Additional Information
Summary
This article contains information about the maximum or minimum value for the ns_max_mss of nsapimgr command.
Max Maximum Segment Size
Run the following command from the shell prompt of a NetScaler appliance to change the Max Maximum Segment Size of the appliance:
nsapimgr -ys ns_max_mss=<value>
The value for ns_max_mss must be between the values 536 and 1460.
If you specify the value less than 536 or more than 1460 with nsapimgr -ys ns_max_mss, the appliance does not recognize the specified value.
Run the following command to confirm the Max Maximum Segment Size value recognized by the appliance:
nsapimgr -d allvariables | grep ns_max_mss
The following screen shot shows that the appliance did not recognize the specified value:
Note: You must access the shell prompt to run the nsapimgr command. The command cannot be issued from the NetScaler command line interface.
