Citrix ADC Virtual Server Counters
Article ID: CTX133891
Updated On:
Description
This article contains information about the newnslog Virtual Server counters and its brief description.
Using the Counters
Log on to the ADC using an SSH client, change to SHELL, navigate to the /var/nslog directory, and then use the ‘nsconmsg’ command to see comprehensive statistics using the different counters available. For the detailed procedure refer to Citrix Blog - NetScaler ‘Counters’ Grab-Bag!.
The newnslog Virtual Server Counters
The following table lists the newnslog Virtual Server counters with a simple description of the counter.
|
Newnslog Counter |
Description |
|
vsvr_IPAddr |
IP address of the virtual server |
|
vsvr_Port |
The port of the virtual server |
|
vsvr_Protocol |
Protocol associated with the virtual server |
|
vsvr_Type |
Virtual server type, CONTENT or ADDRESS |
|
vsvr_flags |
Virtual server Internal Flags |
|
SO_thresh |
Spill Over Threshold set on the Virtual server |
|
sys_cur_virtual servers |
Total number of virtual servers configured on the NetScaler appliance |
|
vsvr_IPstr |
IP address of the virtual server |
|
vsvr_tot_Hits |
Total virtual server hits |
|
vsvr_tot_Miss |
Total virtual server misses |
|
vsvr_tot_err_pgcnt |
Total virtual server error page count |
|
vsvr_num_so |
Number of times virtual server experienced spill over |
|
vsvr_cur_labelled_conn |
Number of Labeled connection on this virtual server |
|
vsvr_push_cur_labels |
Number of labels for this push virtual server |
|
vsvr_tot_deferred_request |
Number of deferred request on this virtual server |
|
vsvr_tot_rdpcookie_parsed |
Number of times MSTS RDP Cookie got parsed on this virtual server |
|
vsLB_Persistence |
Persistence setting for the virtual server |
|
vsLB_Health |
Health of the virtual server. This gives percentage of services bound to this virtual server that are marked with the status as UP. |
|
vscsw_flags |
Flags for all kinds of Content Switching virtual servers |
Issue/Introduction
