Ardence 3.x: Configuration

Technotes Created Modified Read Rating
If You Deploy a Virtual Disk to a Target Device Different from the Master Target, the Computer Crashes
This document describes issues with Blue Screens or Stop error 0x0000007b when deploying to a different target device.
CTX117133
5/2/08 10/30/08 3,803 55555
How to Duplicate a vDisk
Summary This article explains how to duplicate a vDisk. A vDisk can be copied and renamed to make it available for use by Provisioning Server clients. Procedure To duplicate a vDisk, perform ...
CTX115299
11/8/07 10/17/08 810 22
Configuring the Registry Size Limit (Windows NT/2000/XP)
Summary The Registry Size Limit (RSL) controls the total amount of space that can be consumed in paged pool memory and disk space by registry data. Requirements This technote applies to Windo...
CTX115307
11/29/07 9/25/08 1,758 Unrated
How to Configure the PXE Service to Forward to a Standalone TFTP Server
Summary This article explains how to redirect the Preboot Execution Environment (PXE) Service to a different Trivial File Transfer Protocol (TFTP) server. Background By default, the PXE Servi...
CTX116036
2/26/08 9/25/08 1,095 55555
How to Add DHCP PXE Options to Microsoft DHCP Server
Summary This article describes how to add DHCP options 66 and 67 on a Microsoft 2003 DHCP Server so that the 3Com PXE service on Provisioning Server (Ardence) does not have to be used. Backgr...
CTX115094
10/24/07 9/18/08 10,264 4444
How to Configure DHCP on Cisco 6509
Summary This article provides syntax examples for configuring a Cisco Catalyst 6509 switch to act as a DHCP server and/or support PXE boot across subnets/VLANs. Requirements • Cisco Cataly...
CTX115113
10/24/07 8/20/08 2,183 Unrated
How to Correctly Bind a New IP Address on a Provisioning Server
Summary This article describes how to modify the IP address of a Citrix Provisioning Server (Ardence Server) to ensure that the Provisioning services bind correctly to the new IP address. Bac...
CTX115135
11/2/07 8/20/08 1,013 Unrated
How to Configure Option 60 on a DHCP Server
Symptoms This article describes how to configure option 60 on Microsoft's Dynamic Host Configuration Protocol (DHCP) Server to resolve the "PXE-E53: No boot filename received" error...
CTX115212
11/7/07 8/20/08 4,350 55555
Error: New Hardware Found
Symptoms When an Ardence client starts using a shared image with the Cache Type set for Cache on client hard drive , Windows may display the message "New Hardware Found" and prompt...
CTX115423
11/26/07 7/17/08 1,471 Unrated
The Image Build Process Takes a Long Time to Complete
Symptoms During the Image Build process, while the system files are copied from the client’s local hard drive to the virtual disk, the process takes an extended period of time to complete. Op...
CTX115658
12/17/07 7/16/08 1,411 4444
How to Use the Novell Client with Windows AutoLogin (Dynamic Local User) on Ardence Clients
Symptoms With the Microsoft Windows "AutoAdminLogin" feature enabled, once Ardence clients boot a shared image, which includes the Novell Client, and users enter their credentials i...
CTX115625
12/11/07 7/16/08 1,231 Unrated
How to Create a User Account to allow Ardence Secure Clients to Access vDisks
Summary This article describes how to create a user account to allow Ardence Secure Clients to access their vDisks. Note : This technote applies to Ardence 3.X Secure edition only. Background...
CTX115302
11/9/07 7/15/08 493 Unrated
How to Configure Automatic Updates
Summary This article explains how to use the Ardence Automatic vDisk Update utility to provide Ardence clients with updated vDisk images automatically upon boot after a specified time. Requir...
CTX115291
11/8/07 7/15/08 1,178 55555
How to Reduce RAM Cache Utilization on Ardence Clients
Summary This article explains how to reduce RAM cache utilization on Ardence Clients. Background If an image stored on a vDisk is configured for Shared Image mode with the write cache set to ...
CTX115306
11/7/07 7/15/08 665 22
How to Register Ardence 3.x Licenses
Summary This article describes the options available for registering your Ardence 3.x licenses. Background Citrix recommends that your server have an active connection to the Internet prior t...
CTX115667
1/17/08 7/15/08 563 Unrated
How to Create a Linux-based vDisk Image
Summary Ardence supports booting Linux clients. This article is specific to Ardence 3.5, 3.5.1, and 3.5.2. For Ardence 4.1 and later, refer to the product guide. Background In addition to cli...
CTX115301
11/9/07 7/15/08 1,107 4444
How to Image a Hard Drive from an Image Stored on an Ardence vDisk
Summary This article explains how to image a hard drive from an image stored on an Ardence vDisk. This is applicable for 3.x and only 4.1 SP1. Explanation : Although the Ardence Image Builder...
CTX115293
11/9/07 7/15/08 1,011 4444
How to Configure a VMware Session for an Ardence Network
Summary This article describes how to configure a VMware session for an Ardence network. When using Ardence with VMware sessions there are two ways in which you can configure a VMware session...
CTX115295
11/8/07 7/15/08 820 Unrated
How to Configure the Printer Management Feature to Assign Printers to Clients
Summary This article explains how to enable the Printer Management feature to assign printers to clients. Note : This applies to Printer Management in Ardence 3.5.2 and 4.x. Procedure or Step...
CTX115374
11/13/07 7/15/08 837 4444
How to Configure Multiple PXE Services in a Provisioning Environment
Summary This article describes how to prevent client boot conflicts when running multiple Preboot Execution Environment (PXE) services. There are several options for using the PXE service th...
CTX115305
11/9/07 7/15/08 2,065 55555
How to Install and Configure Port Blocker
Summary This article explains how to install and configure the Port Blocker option on an Ardence Server and Client. Background The Port Blocker option, introduced with Ardence 3.3, was develo...
CTX115132
10/31/07 7/14/08 459 Unrated
How to Implement Ardence within a Novell Environment
Summary This article describes how to implement Ardence within a Novell environment. Note : The Novell Client software should not be installed on the client machine prior to building the vDis...
CTX115216
11/7/07 7/14/08 401 Unrated
How to Configure Ardence Client Personality Feature
Summary This article describes how to use the Ardence Client Personality feature introduced in Ardence 3.3. Background Normally, all Ardence clients sharing the same virtual disk must have id...
CTX115294
11/27/07 7/14/08 927 22
How to Configure Outlook Email Accounts for Users Booting to a Shared Image in Ardence
Summary This article describes how to provide users with access to their Outlook email accounts from Ardence client systems that boot a shared image. Note, this article assumes that Active Di...
CTX115213
10/31/07 7/14/08 1,510 4444
How to Roll Back to an Earlier Ardence Version
Summary This article explains how to downgrade the Ardence software. Background It is highly recommended that the Ardence Software downgrade be performed while physically located at the Arden...
CTX115298
11/8/07 7/14/08 578 22
How to Create a FreeDOS vDisk
Summary A vDisk can be created within the Ardence Administrator that contains a FreeDOS image that can be used to boot an Ardence Client in DOS mode. Note : Although the ability to boot an Ar...
CTX115296
11/9/07 7/14/08 661 Unrated
How to Increase the Size of a vDisk
Summary This article explains how to increase the size of an existing vDisk. The procedure described below may be used when additional space is needed in a vDisk that has reached maximum capa...
CTX115300
11/8/07 7/14/08 797 55555
How to Update Network Card Drivers on Provisioning Server
Summary This article describes how to update Network Interface Card (NIC) drivers on Citrix Provisioning Server / Ardence systems. Background During the installation of the Provisioning Serve...
CTX115211
10/31/07 7/14/08 817 4444
How to Assign Static DHCP IP Addresses
Summary This article provides syntax examples for assigning static IP addresses to Ardence clients using the Tellurian DHCP Server bundled with the Ardence Server software. The Tellurian DHCP...
CTX115311
11/7/07 7/14/08 787 22
How to Configure a Stand-alone I/O Server
Summary This article explains how to install and configure stand-alone I/O servers to facilitate load balancing on an Ardence network. Background For large scale deployments of the Ardence En...
CTX115210
10/31/07 7/14/08 392 Unrated
Search
     
Advanced Search
XenApp
XenApp Plugins (Clients)
XenServer
XenDesktop
NetScaler Application Delivery
Access Gateway
EdgeSight
Provisioning Server
WANScaler
Password Manager
Does it work with Citrix? Verify it - introducing the new Citrix Ready Community Verified

Tools

  • Please sign in to access your feeds, alerts and all other subscriptions.
  • Subscribe to Feed