NetScaler Application Delivery Software 6.1: Port Configuration

Technotes	Created	Modified	Read	Rating
Frequently Asked Question About Lightweight Directory Access Protocol (LDAP) on a NetScaler Appliance Q.: After configuring Lightweight Directory Access Protocol (LDAP) on a NetScaler appliance, the system is not able to authenticate users. What could be the reason for the same? A: If you hav... CTX117488	9/22/08	9/22/08	207	Unrated
Binding Multiple IP Addresses to an Interface of a NetScaler Appliance Summary If you have configured a virtual local area network (VLAN) on an interface and try to bind multiple IP addresses to the same VLAN, an error message appears when binding the IP address... CTX117345	6/17/08	6/17/08	813
How to Delete the Last Mapped IP from the Configuration Summary This document describes the procedure to delete the last mapped IP (MIP) from the NetScaler configuration file. Background Under normal circumstances, you cannot remove the last mappe... CTX116972	4/21/08	4/21/08	820	Unrated
FAQ: What is the trunk option on a Netscaler interface used for? Q: What is the trunk option on a NetScaler interface used for? A: Different network equipment vendors use the term trunk differently. Some use it to describe a switch port capable of carryi... CTX115575	1/21/08	1/21/08	875
How to Change the MTU Size Summary This document describes how to change the Maximum Transmission Unit (MTU) size to 1300. Requirements • Access to shell with root privileges • Change should be made during a low period of N... CTX111505	10/25/06	10/26/06	7,793