Knowledge Center Home
> All Products
> NetScaler Application Delivery
> NetScaler Application Delivery Software 6.1
> NetScaler Application Delivery Software 6.1: Networking

NetScaler Application Delivery Software 6.1: Networking

1
2
Next >

Technotes	Created	Modified	Read	Rating
Access to the Web Servers is not Available through the NetScaler Appliance Symptoms You are not able to access the Web servers through the NetScaler appliance virtual servers (vservers) even though the vservers and services are running in the UP state. The vservers ... CTX116878	4/17/08	8/8/08	463	Unrated
How to Set up Link Aggregation and VLAN Trunking on a NetScaler Summary This document shows the basic configuration needed to set up an 802.3ad link aggregate between a NetScaler and a switch that supports Link Aggregation Control Protocol (LACP). On top ... CTX117113	6/25/08	6/25/08	384
How to Restrict Access Gateway Enterprise Edition from Displaying Your Listening Ports Summary This article describes how to restrict Citrix Access Gateway Enterprise Edition from displaying your listening ports. Background When you perform a scan for ports with Access Gateway ... CTX117107	5/30/08	5/30/08	299
Configuring an LDAP Monitor Summary This article describes how to configure the NetScaler Lightweight Directory Access Protocol (LDAP) User monitor. It is recommended that the basic Active Directory (AD) authentication... CTX111109	5/28/08	5/28/08	247	Unrated
IP Address Conflict in the Network Symptoms When migrating from the F5 appliance to the NetScaler appliance, the virtual servers are running. However, you cannot connect to the virtual servers using telnet or other similar uti... CTX116879	5/9/08	5/9/08	250	Unrated
How to Configure Outbound Link Load Balancing for Two ISP Links on a NetScaler Appliance with Reverse Network Address Translation Summary This article describes how to configure Outbound Link Load Balancing for Two ISP Links on a NetScaler Appliance with Reverse Network Address Translation (RNAT) You apply the Link Load... CTX116995	5/8/08	5/8/08	406
How to Delete the Last Mapped IP from the Configuration Summary This document describes the procedure to delete the last mapped IP (MIP) from the NetScaler configuration file. Background Under normal circumstances, you cannot remove the last mappe... CTX116972	4/21/08	4/21/08	470	Unrated
FAQ: What is the trunk option on a Netscaler interface used for? Q: What is the trunk option on a NetScaler interface used for? A: Different network equipment vendors use the term trunk differently. Some use it to describe a switch port capable of carryi... CTX115575	1/21/08	1/21/08	613
How to Configure a NetScaler to Authenticate Against the Global Catalog Server Summary In a multi-domain forest the Active Directory (AD) database becomes partitioned such that each domain maintains a list of only those objects that belong in that domain. For example, a... CTX113655	1/4/08	1/7/08	519	Unrated
How to Configure Link Redundancy Using a Failover Interface Set Configuring the Netscaler to for link redundancy to overcome the switch being a single point of failure. CTX114657	1/4/08	1/4/08	1,115	Unrated
Troubleshooting NetScaler High Availability Issues Summary This document describes how to troubleshoot NetScaler High Availability issues. Procedure To configure NetScaler systems for High Availability (HA) mode, consider the following points... CTX109013	4/13/06	12/5/07	12,765
The Firewall Does Not Update the Address Resolution Protocol Table Q: The firewall does not update the Address Resolution Protocol (ARP) table. Do you need to make any changes in the Group Address Resolution Protocol (GARP) settings? A: Citrix has found that some... CTX112701	11/27/07	11/27/07	601
Active Directory Group Extraction for LDAP Summary This document discusses how to configure the NetScaler to allow access to the NetScaler VPN based on Active Directory groups through Lightweight Directory Access Protocol (LDAP) authentica... CTX111079	6/25/07	6/25/07	8,370	Unrated
How to Load Balance Web Interface with a NetScaler Summary This article describes how to load balance Web Interface with a NetScaler. Background When a NetScaler is used to load balance Web Interface, it uses either the Management IP (MIP) address... CTX111080	1/31/07	4/6/07	8,180
How to Configure Direct Server Return Summary This article describes how to configure Direct Server Return (DSR). Background The concept behind DSR is that the traffic is sourced through the NetScaler, however, the return traffic from... CTX110501	11/14/06	11/14/06	7,034
What is the -tagged parameter used for? Q: What is the –tagged parameter used for? A: The –tagged parameter is used when binding a virtual LAN (VLAN) ID to a physical interface (or LA channel), to put that interface in that VLAN. Fram... CTX110541	10/25/06	10/25/06	3,957	Unrated
How do I configure RNAT for specific hosts? Q: How do I configure Reverse Network Address Translation (RNAT) for specific hosts? A: You can configure RNAT using the set ns rnat command. > set ns rnat < private_ip_address/network... CTX110499	10/24/06	10/24/06	3,860
What is the -trunk Parameter Used For? Q: What is the –trunk parameter used for? A: The –trunk ( ON \| OFF ) parameter can be set on an interface (or Link Aggregation channel) to put the interface in “trunk mode.” For example: > se... CTX110540	10/23/06	10/23/06	3,502	Unrated
What is Reverse Network Address Translation and How is it Different from Network Address Translation? Q: What is Reverse Network Address Translation (RNAT) and how is it different from Network Address Translation (NAT)? A: RNAT is the same as NAT. RNAT is just the terminology used by NetScaler fo... CTX110500	10/13/06	10/13/06	4,815	Unrated
Is it possible to have a multiple-area OSPF configuration in NetScaler? Q: Is it possible to have a multiple-area Open Shortest Path First (OSPF) configuration in NetScaler? A: No, NetScaler supports only type 1, type 2, and type 3 link-state advertisement (LSA). I... CTX110495	10/13/06	10/13/06	3,993
Understanding Metric Exchange Protocol and Monitors for Global Server Load Balancing Summary This document provides an overview of Global Server Load Balancing (GSLB), Metric Exchange Protocol (MEP), monitors, and their relationship in the load balancing decision. Prerequisites ... CTX111081	10/10/06	10/12/06	5,505
How do You Run a Continuous Ping on the NetScaler with Different Packet Sizes and Source IP Addresses? Q: How do you run a continuous ping on the NetScaler with different packet sizes and source IP addresses? A: The number of packets sent by a ping by default is infinite. The –s parameter can b... CTX110502	10/10/06	10/10/06	7,610	Unrated
The NetScaler 12000 System does not Pass Traffic on Interface 0/1 Symptoms When connecting the NetScaler 12000 system to a switch through the 0/1 interface located on the back of the system, it may not pass traffic even though the NetScaler has been configured w... CTX111108	10/10/06	10/10/06	3,266	Unrated
How do You Clear the RX and TX Counters on a NetScaler's Interface? Q: How do you clear the RX and TX counters on a NetScaler interface? A: The clear interface <id> command clears the RX and TX counters on that particular interface. This command clears th... CTX110496	10/9/06	10/10/06	3,504	Unrated
HTTP-ECV Monitor Probes Are Failing Symptoms A custom monitor of type HTTP-ECV has been defined, but is failing probes even though the configured page can be accessed on the Web server. Cause A custom monitor of type HTTP-ECV may be... CTX110167	8/30/06	8/30/06	5,211
After Connecting a New 7000 Series NetScaler to the Network and Setting the Link to 100/full, the Link Doesn't Come up After a Failover. Why? Q: After connecting a new 7000 series NetScaler to the network and setting the link to 100/full, the link doesn’t come up after a failover. Why? A: This is a known issue where the NetScaler fails... CTX110083	8/1/06	8/2/06	4,020	Unrated
After Installing a New 6.1 NetScaler System and Configuring the Basic Settings, Including a Basic Load Balancing Virtual IP Address and Services, All the Services Remain Down Symptoms After installing a new 6.1 NetScaler system and configuring the basic settings, including a basic Load Balancing virtual IP address (VIP) and services, all the services remain down. Cause... CTX110081	7/28/06	7/28/06	610	Unrated
Behavior of Address Resolution Protocol (ARP) and Gratuitous ARP on the NetScaler Summary This document describes the behavior of the Address Resolution Protocol (ARP) and Gratuitous ARP (GARP) on NetScaler devices. Background Typical network devices use ARP to locate the hardw... CTX109980	7/27/06	7/27/06	847
The Switch the NetScaler System is Attached to Constantly Relearns the NetScaler's Media Access Control Address. Is Something Wrong? Q: The switch my NetScaler system is attached to constantly relearns the NetScaler's Media Access Control (MAC) address. Is something wrong? A: This indicates a layer 2 media access protocol misma... CTX109873	7/10/06	7/10/06	3,885	Unrated
What is the Maximum Number of Virtual LANs That Can be Created on a Netscaler System? Q: What is the maximum number of virtual LANS (VLANs) that can be created on a Netscaler system? A: A maximum of 4,096 VLANs can be created on a NetScaler system. This is in agreement with the 80... CTX109861	7/7/06	7/7/06	4,943

1
2
Next >

Knowledge Center

Products

Presentation Server

Presentation Server Clients (ICA)

XenServer

XenDesktop

XenDesktop 2.0

NetScaler Application Delivery

Access Gateway

EdgeSight

Provisioning Server

WANScaler

Password Manager

>> View All Products

Knowledge Resources