Knowledge Center

Alerts Sign In

Knowledge Center Home
> All Products
> NetScaler Application Delivery
> NetScaler Application Delivery Software 5.2
> NetScaler Application Delivery Software 5.2: Networking

NetScaler Application Delivery Software 5.2: Networking

Technotes	Created	Modified	Read	Rating
Access to the Web Servers is not Available through the NetScaler Appliance Symptoms You are not able to access the Web servers through the NetScaler appliance virtual servers (vservers) even though the vservers and services are running in the UP state. The vservers ... CTX116878	4/17/08	8/8/08	463	Unrated
IP Address Conflict in the Network Symptoms When migrating from the F5 appliance to the NetScaler appliance, the virtual servers are running. However, you cannot connect to the virtual servers using telnet or other similar uti... CTX116879	5/9/08	5/9/08	250	Unrated
How to Delete the Last Mapped IP from the Configuration Summary This document describes the procedure to delete the last mapped IP (MIP) from the NetScaler configuration file. Background Under normal circumstances, you cannot remove the last mappe... CTX116972	4/21/08	4/21/08	469	Unrated
Spanning Tree Protocol and NetScaler Summary This document discusses Spanning Tree Protocol (STP) and the NetScaler. Information STP is used to avoid looping in the network by following a mathematical algorithm developed by Radia Per... CTX112341	2/13/07	11/30/07	4,520
Path MTU Discovery Summary NetScalers have a feature called Path MTU Discovery, which is actually a common feature on most networking devices. Path MTU Discovery allows a networking device such as the NetScaler, or ... CTX110491	11/8/06	11/8/06	5,200
HTTP-ECV Monitor Probes Are Failing Symptoms A custom monitor of type HTTP-ECV has been defined, but is failing probes even though the configured page can be accessed on the Web server. Cause A custom monitor of type HTTP-ECV may be... CTX110167	8/30/06	8/30/06	5,211
The Switch the NetScaler System is Attached to Constantly Relearns the NetScaler's Media Access Control Address. Is Something Wrong? Q: The switch my NetScaler system is attached to constantly relearns the NetScaler's Media Access Control (MAC) address. Is something wrong? A: This indicates a layer 2 media access protocol misma... CTX109873	7/10/06	7/10/06	3,885	Unrated
What is the Maximum Number of Virtual LANs That Can be Created on a Netscaler System? Q: What is the maximum number of virtual LANS (VLANs) that can be created on a Netscaler system? A: A maximum of 4,096 VLANs can be created on a NetScaler system. This is in agreement with the 80... CTX109861	7/7/06	7/7/06	4,943
How Do You Configure a Two-arm Mode NetScaler Using Link Aggregation to Connect Pairs of Interfaces to Cisco Switches? Q: How do you configure a two-arm mode NetScaler using Link Aggregation to connect pairs of interfaces to Cisco switches? A: To configure two Link Aggregation channels issue the following command... CTX109843	7/3/06	7/5/06	6,828
How Does the Global Setting for Use Source IP Address (USIP) Interact with the Individual Service USIP Settings? Q: How does the global setting for Use Source IP address (USIP) interact with the individual service USIP settings? A: When USIP mode is enabled globally, two things happen: All automaticall... CTX109858	7/3/06	7/3/06	6,020	Unrated
How Do You Configure a NetScaler Device to Send Syslog Output to a Remote Server? Q: How do you configure a NetScaler device to send syslog output to a remote server? A: As of release 6.1 you can configure a remote syslog server from the command line interface (CLI) using the f... CTX109846	6/30/06	6/30/06	6,937	Unrated
What Limitations Are There On NetScaler Access Control Lists? Q: What limitations are there on NetScaler Access Control Lists (ACLs)? A: A maximum of 1,024 ACLs can be configured on a NetScaler system with the 6.x release. Previous releases are limited to 5... CTX109748	6/22/06	6/22/06	4,077	Unrated
What is a Mapped IP Address? Q: What is a Mapped IP address (MIP)? A: A MIP is a Mapped Internet Protocol address in the NetScaler system. Request switching intercepts an incoming client’s IP and replaces it with a ... CTX109747	6/22/06	6/22/06	9,978
How Do You Disable the Telnet Logon Banner? Q: How do you disable the Telnet logon banner? A: Note : The procedure below applies to NetScaler version 5.2. Edit the /etc/inetd.conf file and append the -h option to the line that starts w... CTX109728	6/19/06	6/19/06	4,950
How is ADNS and DNS configured on the NetScaler? Q. How are ADNS and DNS configured on the NetScaler? A. NetScaler can be configured as an ADNS server where it’s authoritative for all queries defined on the NetScaler. It can also be used to load... CTX109726	6/9/06	6/12/06	6,471	Unrated

Search

Knowledge Center

Products

Presentation Server

Presentation Server Clients (ICA)

XenDesktop 2.0

NetScaler Application Delivery

Access Gateway

Provisioning Server

Password Manager

>> View All Products

Citrix Developer Community

Knowledge Resources

©1999-2008 Citrix Systems, Inc. All rights reserved.