Knowledge Center Home
> All Products
> NetScaler Application Delivery
> NetScaler Application Delivery Software 5.2
> NetScaler Application Delivery Software 5.2: Installation

NetScaler Application Delivery Software 5.2: Installation

Technotes	Created	Modified	Read	Rating
FAQ: Transfering Files to or From the NetScaler Device? Q: How do I transfer files to or from the NetScaler device? A: There are times when you need to transfer files to or from a NetScaler device. For example, to facilitate a code upgrade, the n... CTX109740	6/22/06	8/29/08	6,511	Unrated
NetScaler Hardware/Software Compatibility - Supported Upgrade/Downgrade Paths This article provides information about NetScaler OS release firmware compatibility for the NetScaler 7000, 9000, 9010, 9010 FIPS, 9050, 9100, 9400, 9800, 9950, 10000, 10010, 12000 and MPX platforms. CTX113357	5/18/07	8/8/08	3,786
How to Download the Latest Releases and Builds of the NetScaler Software from the Citrix Web Site Summary This article describes how to download the latest releases and builds of the NetScaler software from the Citrix Web site. Procedure On the Citrix Web site, only the latest build of ea... CTX116969	4/17/08	4/21/08	828	Unrated
Dependency on FreeBSD Version for Installing Specific Releases of NetScaler Application Delivery Software Summary This article explains the dependency on a FreeBSD version for installing specific releases of the Citrix NetScaler Application Delivery software. NetScaler 7000 Series The NetScaler 7... CTX115764	2/14/08	2/15/08	708	Unrated
What are the Risks if a Pair of NetScalers in a High Availability Deployment have Differing Clocks? Q: What are the risks if a pair of NetScalers in a High Availability (HA) deployment have differing clocks? A: It is strongly advised that the NetScalers be synchronized with each other. Major con... CTX109869	7/13/06	7/13/06	4,390	Unrated
What can be Done if You Cannot Set the Time Zone from Within a Terminal Window as the Display is Distorted? Q: What can be done if you a cannot set the time zone from within a terminal window as the display is distorted? A: The command line interface (CLI) operation within a NetScaler system's confi... CTX109870	7/13/06	7/13/06	5,192	Unrated
How Do You Create a User Account that is Restricted to Read-only Access to the Dashboard Utility and the NetScaler Configuration GUI in NetScaler Release 5.2? (not applicable to version 6.0 and later) Q: How do you create a user account that is restricted to read-only access to the Dashboard utility and the NetScaler configuration GUI in release 5.2? (this does NOT apply to version 6.0 and late... CTX109868	7/7/06	7/7/06	1,086	Unrated
How Do You Silence the Alarm on a NetScaler 9800 Model? Q: How do you silence the alarm on a NetScaler 9800 model? A: Dual power supplies are equipped on all 2U systems. When one of those supplies is not receiving power an alarm sounds. Some systems ar... CTX109857	7/7/06	7/7/06	4,195	Unrated
What are the Power Usage Measurements (Such as British Thermal Unit Numbers) for NetScaler Devices? Q: What are the power usage measurements (such as British thermal unit (BTU) numbers) for NetScaler devices? A: System ratings: 9400 – 100-240VAC, 50/60Hz, 4A. 9800/9900 – 100-240VAC, 50/60Hz, 6... CTX109864	7/3/06	7/3/06	4,856
Users Can Ping their NetScaler System, but Secure Shell, the Web GUI, and Simple Network Management Protocol Are Not Responding. Symptoms Users can ping their NetScaler system, but Secure Shell (SSH), the Web GUI, and Simple Network Management Protocol (SNMP) are not responding. Cause This is most likely caused by the ma... CTX109863	7/3/06	7/3/06	4,701	Unrated
How Do You Configure a NetScaler Device to Send Syslog Output to a Remote Server? Q: How do you configure a NetScaler device to send syslog output to a remote server? A: As of release 6.1 you can configure a remote syslog server from the command line interface (CLI) using the f... CTX109846	6/30/06	6/30/06	7,376	Unrated
Can a NetScaler System be Configured Remotely Without Using a Command Line Interface? Q: Can a NetScaler system be configured remotely without using a command line interface? A: Yes. Once you have completed the NetScaler initial configuration with ns config , the NetScaler GUI is ... CTX109844	6/30/06	6/30/06	4,620	Unrated
How to Block Specific Subnets or IP Addresses From Accessing a Particular URL on Your Servers Summary This article describes how to block specific subnets or IP addresses from accessing a particular URL on your servers (for example, /status/). Procedure Issue the following commands: ad... CTX109841	6/30/06	6/30/06	5,495	Unrated
How is it Possible to Lose Mapped IP Addresses in an Upgrade From NetScaler Version 5.2 to 6.x? Q: How is it possible to lose Mapped IP (MIP) addresses in an upgrade from NetScaler version 5.2 to 6.x? A: This happens when the 5.2 configuration contains an MIP in a different subnet than the N... CTX109781	6/26/06	6/26/06	809	Unrated
Why Does the Upgrade to Version 5.2 Fail and Abruptly Log Out the User? Q: Why does the upgrade to NetScaler version 5.2 fail and abruptly log out the user? A: This is caused by attempting to run the upgrade after logging in to the NetScaler as the user “nsroot.” The ... CTX109769	6/26/06	6/26/06	721	Unrated
How Does Group Extraction for RADIUS Work in NetScaler Version 5.2? Q: How does group extraction for RADIUS work in NetScaler version 5.2? A: Starting with a little background with RADIUS: RADIUS has a few standard attributes, but it is designed to be extensible ... CTX109741	6/26/06	6/26/06	4,725	Unrated
What Limitations Are There On NetScaler Access Control Lists? Q: What limitations are there on NetScaler Access Control Lists (ACLs)? A: A maximum of 1,024 ACLs can be configured on a NetScaler system with the 6.x release. Previous releases are limited to 5... CTX109748	6/22/06	6/22/06	4,292	Unrated
What is a Mapped IP Address? Q: What is a Mapped IP address (MIP)? A: A MIP is a Mapped Internet Protocol address in the NetScaler system. Request switching intercepts an incoming client’s IP and replaces it with a ... CTX109747	6/22/06	6/22/06	10,459
How Do You Validate NetScaler's Authentication Account in a Lightweight Directory Access Protocol Tree? Q: How do you validate NetScaler's authentication account in a Lightweight Directory Access Protocol (LDAP) tree? A: Run the following command from the FreeBSD shell to validate NetScaler’s authen... CTX109739	6/21/06	6/21/06	4,780
How to Use Multiple Authentication Systems With NetScaler Summary This article describes how to use multiple authentication systems for the NetScaler SSL Virtual Private Network (VPN) for NetScaler version 5.x. Procedure For this example, assume two VPN ... CTX109736	6/20/06	6/20/06	6,236	Unrated
How Do You Troubleshoot Role-Based Authorization? Q: How do I troubleshoot Role-Based Authorization (RBA)? A: Every command executed by a user who is NOT named "nsroot" is logged in /var/log/auth.log. Each log entry specifies the user... CTX109735	6/19/06	6/19/06	4,471	Unrated
How Do You Disable the Telnet Logon Banner? Q: How do you disable the Telnet logon banner? A: Note : The procedure below applies to NetScaler version 5.2. Edit the /etc/inetd.conf file and append the -h option to the line that starts w... CTX109728	6/19/06	6/19/06	5,163
How Do You Configure a NetScaler System for Secure Shell Access Only? Q: How do you configure a NetScaler system for Secure Shell (SSH) access only? A: As of NetScaler version 6.0, this is the default configuration. Telnet and FTP are disabled. For previous releas... CTX109724	6/19/06	6/19/06	4,365	Unrated
How do You Use OpenSSL to Test Whether an SSL Server is Working Q: How do you use OpenSSL to test whether an SSL server is working? A: Use the following command: root@ns#openssl s_client -connect destip:destport -debug -state If that works, you'll be left at ... CTX109723	6/16/06	6/16/06	6,798
How do You Modify the Telnet Logon Banner? Q: How do you modify the telnet logon banner? A: This banner is derived from settings in the /etc/gettytab file. The following procedure is recommended to get a customized banner Edit the ... CTX109722	6/16/06	6/16/06	5,036	Unrated
Does NetScaler Support Network Time Protocol? Question: Does NetScaler support Network Time Protocol (NTP)? A: NTP support is dependent on the NetScaler release. As of the 6.0 release, NTP-based clock synchronization is available for the... CTX109713	6/15/06	6/15/06	5,442
Are the Commands in the NetScaler Command Line Interface Case-sensitive? Q: Are the commands in the NetScaler command line interface (CLI) case-sensitive? A: No, the commands in the NetScaler CLI are not case-sensitive. CTX109705	6/13/06	6/13/06	6,974
NetScaler Installation Failures During Migration to Version 6.1 Symptoms These article details problems that arise if/when the disc space on the flash drive is insufficient to install the new kernel. The following is an example error message that may be displa... CTX109085	4/12/06	4/12/06	4,682
Upgrading the NetScaler License File Summary This document describes how to upgrade the NetScaler license file. Procedure To upgrade the license file perform the following: 1. Type cd /nsconfig to access the directory. 2. Back up t... CTX109086	4/11/06	4/11/06	5,339	Unrated
NetScaler API Architecture Explained Summary This document provides a description of the NetScaler API Architecture. Description The following steps explain the API Architecture: 1. The client formats a request containing XML conform... CTX109087	4/10/06	4/10/06	5,449

Products

XenApp

XenApp Plugins (Clients)

XenServer

XenDesktop

NetScaler Application Delivery

Access Gateway

EdgeSight

Provisioning Server

WANScaler

Password Manager

>> View All Products

Does it work with Citrix? Verify it - introducing the new Citrix Ready Community Verified

Knowledge Resources

Tools

Please sign in to access your feeds, alerts and all other subscriptions.
Subscribe to Feed